Inserting Batteries In The Remote Control; Setting The Date And Time - Samsung SV-DVD1 Instruction Manual

01479A DVD-V5000/XSA-GB2 9/5/56 8:04 AM Page 17

Inserting Batteries in the Remote Control

You must insert or replace the batteries in the remote control when
you:
Purchase the DVD-VCR
Find that the remote control is no longer working
correctly
1 Push the tab in the direction of the arrow to release the battery
compartment cover on the rear of the remote control.
2
Insert two AA, R6 or equivalent batteries, taking care to respect
the polarities:
+ on the battery with + on the remote control
– on the battery with – on the remote control
3 Replace the cover by aligning it with the base of the remote
control and pushing it back into place.
Do not mix different battery types (manganese and
alkaline for example).

Setting the Date and Time

Your DVD-VCR contains a 24-hour clock and calendar used to:
Automatically stop programme recording
Preset your DVD-VCR to record a programme
automatically
You must set the date and time when:
You purchase the DVD-VCR
The power supply remains off for more than 60 minutes
Do not forget to reset the time when you change
clocks from winter to summer time and vice versa.
1
Press SETUP on the remote control.
Result: The programming menu is displayed.
2 Press the corresponding , or ,
CLOCK SET option.
3 Press the ENTER button to select this option.
Result: The CLOCK SET menu is displayed.
4
Press or to select the hour, minutes, day, month and year.
Result: The option selected flashes.
5
Press the or buttons to increase or decrease the value.
Result: The day of the week is displayed automatically.
You can hold the or buttons down to scroll more
quickly through the values.
6
On completion, press SETUP twice to exit the menu.
1
CLOCK SET
E N T E R E N D :S E T U P
buttons to select the
12:00 1/JAN/2000
E N D :S E T U P
17
GB
S A T