Presetting The Stations Manually - Samsung DVD-V6700S User Manual

4
Press the OK button to start the auto scan-
ning. The message Please Wait is displayed.
Please Wait
• The first frequency band is scanned and
stored, then the DVD-VCR searches for the
second station and so on.
When the automatic scanning procedure
has finished, the DVD-VCR switches
automatically to programme 1.
• If you wish to cancel the auto scanning
before the end, press the MENU button.
Note
• The number of stations automatically stored by the
DVD-VCR depends on the number of stations that
it has found.
• The time and date are set automatically from the
broadcast signal. If the signal is weak or ghosting
occurs, the time and date may not be set automati-
cally. In this case, they should be set manually
(refer to page 15).
• Once the auto scanning procedure has finished,
some stations may have been stored more than
once; select the stations with the best reception
and delete the ones no longer required (refer to
page 18).
Auto Setup
10%
RETURN MENU

Presetting the Stations Manually

You do not need to preset the stations manually
if you have already set them automatically.
1
Press the MENU button, then press the OK or
button.
SETUP
Language
Clock
DVD
Install
VCR
User Set
Auto Power Off
PROG
Screen Messages
FUNC
OK
2
Press the or
then press the OK or
The Install menu is displayed.
SETUP
Auto Setup
Manual Setup
DVD
VCR Output
VCR
PROG
FUNC
OK
3
Press the or
Setup, then press the OK or
The TV STATION TABLE menu is displayed.
4
Press the or
required programme number.
❉ ❉ TV STATION TABLE ❉ ❉
PR CH
1 021
2
3
4
5
DELETE : CLEAR
5
Press the button to preset the station.
The MANUAL TUNING menu will be dis-
played.
Press the or
channels. The frequency band is scanned and
the first station found is displayed.
Setup
: English
: Off
: On
RETURN MENU
button to select Install,
button.
Install
: CH60
RETURN MENU
button to select Manual
button.
button to select the
NAME
- - - -
SWAPPING : OK
RETURN
button to start scanning the
English - 17