Connecting Dvd-Vcr To The Tv Using The Rf Cable; Connecting Dvd-Vcr To The Tv Using The Scart Cable - Samsung DVD-V6000 User Manual

Connecting DVD-VCR
to the TV using the
RF Cable
To receive television programmes a signal must be
received from one of the following sources:
• An outdoor aerial
• An indoor aerial
• A cable television network
• A satellite receiver
Make sure that both the television and the
DVD-VCR are switched off before
Note
connecting the cables.
1
Remove the aerial or network input cable from
the television.
2
Connect this cable to the 75Ω coaxial jack
marked on the rear of your DVD-VCR.
3
Plug the RF Cable supplied into
your DVD-VCR.
4
Plug the other end of the RF Cable into the
connector previously used for the aerial on the
television.
TV
4
RF cable
the jack on
TV
Aerial
Aerial cable
2
3
Connecting DVD-VCR
to the TV using the
SCART Cable
You can connect your DVD-VCR to the television
using the SCART cable if the appropriate input is
available on the television. You thus:
• Obtain better quality sound and pictures
• Simplify the setting up procedure of your DVD-VCR
Regardless of the type of connection chosen,
you must always connect the RF Cable
Note
supplied. Otherwise, no picture will be visible on
the screen when the DVD-VCR is switched off.
Make sure that both the television and the
DVD-VCR are switched off before connecting
the cables.
1
Connect the Aerial Cable.
2
Connect one end of the SCART cable to the AV1
(EURO AV) jack on the rear of the DVD-VCR.
3
Plug the other end into the appropriate
connector on the television.
Connecting the Audio Output Cable
You can connect your DVD-VCR to a Hi-Fi system.
Example:You wish to take advantage of the quality of
your Hi-Fi stereo system when watching a
disc play.
4
Plug the audio output cable into the audio
connectors on the rear of your DVD-VCR.
5
Plug the other end of the audio cable into the
appropriate input connectors on your Hi-Fi
stereo system.
Aerial
1
TV
3
RF cable
4
2
5
English - 11