Connecting Dvd-Vcr To The Tv Using The Rf Cable; Connecting Dvd-Vcr To The Tv Using The Audio/Video Cable; Rf Cable - Samsung DVD-V7500K User Manual

Connecting DVD-VCR
to the TV using the

RF Cable

To receive television programmes a signal must be
received from one of the following sources:
• An outdoor aerial
• An indoor aerial
• A cable television network
• A satellite receiver
Make sure that both the television and the
DVD-VCR are switched off before
Note
connecting the cables.
1 Remove the aerial or network input cable from
the television.
Connect this cable to the 75Ω coaxial jack
2
marked on the rear of your DVD-VCR.
3 Plug the RF Cable supplied into
your DVD-VCR.
4 Plug the other end of the RF Cable into the
connector previously used for the aerial on the
television.
TV
4
RF cable
10 - English
the jack on
TV
Aerial
Aerial cable
2
3
Connecting DVD-VCR
to the TV using the
Audio/Video Cable
You can connect your DVD-VCR to the television
using the Audio/Video cable if the appropriate input
is available on the television. You thus:
• Obtain better quality sound and pictures
• Simplify the setting up procedure of your DVD-VCR
Regardless of the type of connection chosen,
you must always connect the RF Cable
Note
supplied. Otherwise, no picture will be visible on
the screen when the DVD-VCR is switched off.
Make sure that both the television and the
DVD-VCR are switched off before connecting
the cables.
1 Connect the RF Cable.
2 Connect one end of the Audio/Video cable to
the Video output and Audio L, R output jack on
the rear of the DVD-VCR.
3 Plug the other end into the appropriate
connector on the television.
Aerial
Aerial cable
RF cable
ANT IN