ABB MAG-SM Instruction Bulletin page 31

Field mount housing and 19“-design
Table of Contents

Advertisement

Submenu/Parameter
Tot. function
Display
ENTER
Submenu
Operating mode
ENTER
Electromagnetic Flowmeter Converter
Entry Type
Overflow ← R
004
Tot. function
Standard
Tot. function
Diff. totalizer
from table
1st Line
Q [%]
2nd Line
Totalizer
1st Line multiplex
off
2nd Line multiplex
TAG Number
from table
Operating mode
Standard
ENTER
Comments
See forward direction overflow counter
The totalizer function is automatically set as a function of the
selections in the "Operating Mode" submenu.
Operating mode Standard = Totalizer function Standard;
Operating mode Piston Pump = Totalizer function
Standard = For "Totalizer Function Standard" the forward and
reverse flows are totalized on two separate totalizers. If
forward flow direction only is selected, only the forward
totalizer is activated.
Difference totalizer = A single totalizer is used for both flow
directions. The flow is added in the forward direction and
subtracted in the reverse direction. When the totalizer value is
negative, i.e. the reverse flow totals are larger than the forward
flow totals, the direction indicator in the display changes from
"
F" to "
R". The pulse outputs (active or passive) are not
affected by these settings.
Exit the submenu
C/CE
Process Information: Various values can be selected,
(independently for each line), for the process information display:
Q [%]
Flowrate in %
Q [Units]
Flowrate in direct reading engineering units
Q [mA]
Flowrate in mA
Q [m/s]
Flowrate in m/s
Bargraph
Flowrate as a bar graph
Totalizer
Totalizer values for forward/reverse
or only forward-, reverse-, or difference totalizer
values. (for piston pump operating mode)
TAG-No.
Meter identification number
off
No function (only for multiplex mode)
Blank line
Only for 2nd line
In the multiplex mode an additional value can be displayed in the
1st line.
Displays are switched every 15 seconds.
For selections see display 1st line.
See 1st Line Multiplex
Exit the submenu
C/CE
Operating mode "Standard" is to be selected for continuous
flowrate measurements.
Difference totalizer
25

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

50sm1000

Table of Contents