Table of Contents
Advertisement
System Setup
DVD-Recorder
Programme
No Disc
Programme
VideoPlus+
Scheduled Record List
Setup
VideoPlus+ Extended : Off
MOVE
OK
RETURN
EXIT
DVD-Recorder
Title List
DVD-RW(VR)
Title List
Title List
Playlist
Disc Manager
Programme
Setup
MOVE
OK
RETURN
EXIT
DVD-Recorder
Auto Setup
No Disc
Auto setup will be started.
Check antenna and TV cable connection.
OK
RETURN
Auto Channel Memory
17%
Stop
DVD-Recorder
Auto Setup
No Disc
Date
Time
Auto Clock
JAN
01
2007
12
00
On
MON
MOVE
OK
RETURN
On-Screen Menu Navigation
The on-screen menus allow you to enable or disable various functions on
your DVD Recorder.
Press the Menu button to open the on-screen menu and then, use the
►
following buttons to navigate through the on screen menus.
►
►
1. EXIT Button
Press this button to exit the on-screen menu.
2. ▲▼, ◄ ► Buttons
Press these buttons on remote control to move the selection bar ▲▼,◄ ►
to cycle through the menu options.
3. OK Button
Press this button on the remote control to confi rm any new settings.
►
4. RETURN Button
Press this button on the remote control to return to the Previous Menu
screen displayed or to exit the on-screen Menu.
Plug & Auto Setup
Your DVD Recorder will automatically set itself up when it is plugged in for
the fi rst time. TV stations and clock will be stored in memory. The process
takes a few minutes. Your DVD Recorder will then be ready for use.
1. Connect the RF cable as indicated on page 15.
(Connecting Your DVD Recorder to the TV Using the RF Cable and scart
cable.)
2. Plug the DVD Recorder into the mains.
"Auto" in the front panel display fl ickers.
3. Press the OK button or wait for a few seconds to start the auto setup.
4. Auto Channel scan will be started.
• The number of stations automatically stored by the DVD Recorder depends
on the number of stations that it has found.
5. Check the date and time.
• If it is correct, press the OK button then the date and time will be saved.
If you don't press the OK button, the date and time will be saved
automatically after 5 seconds.
• If it is incorrect, you can set it up manually.
■
Now, DVD Recorder is ready for use. Function for "Plug & Auto Setup" is
fi xed already. So if you want to change this fi xed one, you can change
it by Presetting the Stations in OSD "Presetting Channels with the
Manual setup function" menu. (see page 21)
English - 19
Hide quick links:
Advertisement
Table of Contents
