Omron SGE Series Manual page 3

Extensive Lineup
Sensor length
150 to 6,100 mm
(in 50 mm increments)
Height
34 to 80 mm in six series
Easy to Order & Assembly Free
Shape
Select a shape from five series as required
in your application or equipment
Length
Select any length from 150 mm to 6,100 mm with
increments of 50 mm.
SCC Edge Controller
We have prepared a lineup, tailor-made to fit with your devices and applications.
SGE-245
SGE-125
By covering just 4 points, a ready-to-use Safety Edge will be delivered to you:
POINT
POINT
3
50mm 50mm 50mm 50mm
Note: For details, refer to "Model Number Structure" on page 4 or later.
Dedicated SCC Edge Controller that regulates a system conforming to Safety Category 3.
Dedicated SCC Edge Controller enables establishment
of a safety system conforming to PLe Safety Category 3
(when hazards are directly blocked by built-in relays)
Any short-circuits or breaks in the system are
monitored and its status is indicated with LED.
Authentificated under major safety standards
SGE-365
SGE-225
POINT
1 2
POINT
4
When using applications that require W
increased water resistance, please in
use models that give sealing covers. u
SGE-245L
Wiring
Select wiring from four types (2-wire/connector
(male/female) cable, terminating resistor) and
cable length 100 mm or any length from 500 mm
to 10,000 mm with increments of 500 mm for both
ends of the Safety Edge.
Mounting base
An L-shaped mounting base is also provided
depending on the mounting location
(except the SGE-125 series)
Power supply LED indicator
Active LED indicator
Error LED indicator
Auxiliary output LED indicator
Note: For details on LED indicators, refer to "Connection" on page 13.