Omron SGE Series Manual page 2

SCC
Edge Controller ontr tr trol tr o ol o o lle le le ler
Shutter Door
The Safety Edge mounted to the end of a shutter door stops the
downside movement of the shutter to prevent shearing of a person or
object when it detects a contacts with them.
Protective Door
of a Processing Machine
The Safety Edge, mounted to the moving part of a protective door, will
stop door movement to prevent jamming of persons or objects upon
detection of contact with them.
Reciprocating Table
of a Machine Tool
The Safety Edge, mounted to the moving part of a recipro- cating
table, will stop the table's movement to prevent collision with the
moving part or jamming between the moving part and structures
such as walls or poles upon detection of contact with workers.
Introducing the New Safety Edge
- Friendly to Human and Machines
The SGE Safety Edge, mounted to moving parts such as doors and fences of Edge, mounted to moving parts such as doors and fences of
mechanical equipment, will stop hazards from moving parts or undergo a
complete system shutdown upon detection of contact with persons or objects.
Its elastic material and shock absorption properties soften the impact on such
persons or objects. The SCC Edge Controller conforms to PLe/Safety Category 3.
Occurrance of any short-circuits and/or breaks are continually monitored and
the status shown with LED indicators.
Protecting people in such areas like:
SGE
Safety Edge