Mitsubishi Electric MELSEC iQ-R Series User Manual page 23

Ethernet connection
This function connects an Ethernet device to a module without interfering with CC-Link IE TSN.
Function
Connection with MELSOFT products and
a GOT
Connection with SLMP-compatible
devices
Security
This function ensures security according to the network environment by restricting access for each communication path to the
CPU module.
Function
IP filter
Remote password
RAS
RAS stands for Reliability, Availability, and Serviceability. This function improves overall usability of automated equipment.
Function
Slave station disconnection
Automatic return
Loopback function
Master station duplication detection
IP address duplication detection
Time synchronization
Synchronization function
This function adjusts the timing with the timing of different slave stations connected on the same network.
Function
CC-Link IE TSN network synchronous
communication function
Description
Allows programming and monitoring of the programmable controller using
the engineering tool, and monitoring and testing of the programmable
controller from the GOT via Ethernet.
Allows SLMP-compatible devices (such as a personal computer or a vision
sensor) to be connected to the RJ71GN11-T2.
Description
Identifies the IP address of the access source, and prevents unauthorized
access.
Permits or prohibits access from the external device to the CPU module via
the RJ71GN11-T2.
Description
Stops data link of the station where an error occurred, and continues data
link only for stations that are operating normally.
Restarts the data link automatically when the slave station that was
disconnected due to an error becomes normal again.
Continues data link with normally operating stations even if a cable
disconnection or faulty station occurs in a ring topology network
configuration.
If one network has multiple master stations, duplication is detected.
If one network has stations with the same IP address, duplication is
detected.
Synchronizes the time of slave stations with the time synchronization source
(CPU module of the master station).
Description
Synchronizes control cycles between slave stations over CC-Link IE TSN
according to the inter-module synchronization cycle specified in the master
station. This allows different slave stations on the same network to operate
with the same timing.
Availability
Master Local
station station
 
 
 
Availability
Master Local
station station
 
 
Availability
Master Local
station station
 
 
 
 
 
 
Availability
Master Local
station station
 
3 FUNCTION LIST
21
3