Settings in the local stations
Connect the engineering tool to the CPU module on the local station and set parameters. Set the station number 1 and 2 to
the same setting.
1.
Set the CPU module and add a module label of the CPU module. The setting method of the CPU module and addition
method of the module label are the same as those of the master station. ( Page 64 Setting in the master station)
2.
Set the RJ71GN11-T2 as follows.
[Navigation window] [Parameter] [Module Information] Right-click [Add New Module]
3.
Add the module labels of the RJ71GN11-T2. The addition method of the module label is the same as that of the master
station. ( Page 64 Setting in the master station)
4.
Set the items in "Required Settings" as follows.
[Navigation window] [Parameter] [Module Information] [RJ71GN11-T2] [Required Settings]
• For the station No.1
• For the station No.2
7.1 Communication Example of the Master Station and Local Stations
7 COMMUNICATION EXAMPLES
7
67