Dante Flows For Shure Devices; Ease Files Available Online; Specifications - Shure Microflex MXN5-C User Manual

• Ability to switch off Energy Efficient Ethernet (EEE). EEE (also known as "Green Ethernet") may cause audio dropouts and
problems with clock synchronization.
• Diffserv (DSCP) Quality of Service (QoS) with strict priority and 4 queues
Ethernet cables should be:
• Cat5e or better
• Shielded

Dante Flows for Shure Devices

Dante flows get created any time you route audio from one Dante device to another. One Dante flow can contain up to 4 audio
channels. For example: sending all 5 available channels from an MXA310 to another device uses 2 Dante flows, because 1
flow can contain up to 4 channels.
Every Dante device has a specific number of transmit flows and receive flows. The number of flows is determined by the type
of Dante chip used in the device.
Unicast and multicast transmission settings also affect the number of Dante flows a device can send or receive. Using multi­
cast transmission can help overcome unicast flow limitations.
Shure devices currently use 2 types of Dante chips:
Dante Platform
Brooklyn II
Ultimo/UltimoX
Learn more about Dante flows in our FAQs

EASE Files Available Online

EASE files are available for this device at shure.com.

Specifications

All specifications are within ± 3 dB unless otherwise noted.
Connector Type
RJ45
Power Requirements
Power over Ethernet (PoE) Class 0 or PoE Plus Class 4
Shure Devices Using Plat-
form
ULX-D, SCM820, MXWAPT,
MXWANI, MXA910,
MXA710, P300
MXA310, ANI4IN, ANI4OUT,
ANIUSB-MATRIX, ANI22,
MXN5-C
or from Audinate.
Unicast Transmit Flow
Limit
32
2
Shure Incorporated
Unicast Receive Flow Limit
32
2
21/24