5.
Use Designer or Dante Controller to route the signal from the first loudspeaker to the next one. Repeat this process for
each additional loudspeaker.
Setting Device Height and Listener Height
To accurately display loudspeaker coverage, set the device height and listener height in Designer.
1.
Add the loudspeaker to a location and go to [Your location] > Coverage map.
2.
Select the loudspeaker and go to Properties > Position to adjust:
◦
X/Y position in location grid
◦
Device height
◦
Listener height
3.
Set the device height and listener height for accurate coverage information. The 3 rings represent -3, -6, and -9 dB at 1
kHz. The rings move as you adjust device height and listener height to show loudspeaker coverage.
EASE files are available at shure.com.
Shure Incorporated
16/24