Dante Flows For Shure Devices - Shure Microflex MXN5-C Manual

Port TCP/UDP Protocol
2202 TCP ASCII
5353 UDP mDNS
5568 UDP SDT (multicast)
57383 UDP SDT (unicast)
8023 TCP Telnet
8180 TCP HTML
8427 UDP SLP (multicast)
64000 TCP Telnet
*These ports must be open on the PC or control system to access the device through a firewall.
†
These protocols require multicast. Ensure multicast has been correctly configured for your network.
See Audinate's website for information about ports and protocols used by Dante audio.

Dante Flows for Shure Devices

Dante flows get created any time you route audio from one Dante device to another. One Dante flow can contain up to 4 audio
channels. For example: sending all 5 available channels from an MXA310 to another device uses 2 Dante flows, because 1
flow can contain up to 4 channels.
Every Dante device has a specific number of transmit flows and receive flows. The number of flows is determined by Dante
platform capabilities.
Dante Flows for Shure Devices
Dante Platform
Brooklyn II
Brooklyn II (without SRAM)
IP Core
Ultimo/UltimoX
DEP
DAL
Learn more about Dante flows in our FAQs
Description
Required for 3rd party control strings
†
Required for device discovery
†
Required for inter-device communication
Required for inter-device communication
Debug console interface
Required for web application (legacy firmware only)
†
Required for inter-device communication
Required for Shure firmware update
Shure Devices Using Plat-
form
ULX-D, SCM820, MXWAPT,
MXWANI, P300, MXCWAPT
MXA920, MXA910, MXA902,
MXA710, AD4, AD600,
APXD2
MXA920-V3, MXA902-V3,
MXA901
MXA310, ANI4IN, ANI4OUT,
ANIUSB-MATRIX, ANI22,
MXN5-C
ANIUSB-MATRIX-V3
IntelliMix Room
or from Audinate.
Transmit Flow Limit
32
16
32
2
2
16
Shure Incorporated
Factory De-
fault
Open
Open
Open
Open
Closed
Open
Open
Open
Receive Flow Limit
32
16
32
2
2
16
21/25