Behringer EUROPOWER PMP6000 Quick Start Manual page 4

EUROPOWER
PMP6000
PMP4000
PMP1680S
The Ins and Outs
Use the CD/TAPE IN RCA inputs to feed in
external stereo signals from CD players or tape
decks. The VOICE CANCELLER switch eliminates
the vocals from pre-recorded music for instant
karaoke applications.
MON knob
adjusts amount
of channel's signal
sent to MONITOR
output jack and/
or OUTPUT A
when driving
passive monitors
FX 1 & 2 knobs
adjust amount
of signal sent to
respective
multi-FX
processors
PAN knob
positions
channel in
stereo fi eld
LEVEL knob
adjusts channel
volume
FX RET 1 & 2 knobs
adjust amount
of signal from
internal multi-FX
processor in main
or monitor mix
CD/TAPE OUT RCA outputs
send line-level signals from the
mixer to a recording device. The left
and right main outputs can be used
for a variety of purposes, including
connecting more power amps.
Connect monitor power amps or active
monitor speakers to the MON SEND
output. Powered outputs on these
mixers are available in professional
Speakon-compatible format for
secure operation.
MULTI-FX Processor
EQ knobs adjust adds selected
high, mid and sound eff ect to
low frequencies channels whose FX
of channel knob is turned up
GRAPHIC CD/TAPE IN
EQ adjusts knobs adjust
specifi c volume
frequencies of CD/TAPE IN
signal in main
or monitor mix
Small, Simple, Superb
lightweight (PMP6000: 13.1 kg/28.9 lbs;
PMP4000: 0.4 kg/22.9 lbs; PMP1680S:
9.9 kg/28.8 lbs), easy-to-use powered
mixer. BEHRINGER powered mixers
are the most effi cient, aff ordable mixers
for the job, and are even suitable for use
as pure analog mixers or as pure power
amplfi ers. With new technological
advantages and incredible built-in
features, it's easier than ever to lend
exceptional sound quality to all kinds of
public performances.
PHANTOM switch METERS
provides 48V to display main
the XLR inputs and monitor
for use with output
condenser mics signal levels
MAIN MASTER MONITOR MASTER
knob adjusts knob adjusts
output of main output of monitor
signal signal and OUTPUT
A when using
MON/MONO mode
Medium-sized events call for a
POWER AMP
switch selects
operating mode
of power amp
SPEAKER PROCESSING
switch allows mixer to
compensate for speakers
with limited low end
frequency response
STANDBY
button mutes all
input channels
except CD/TAPE
inputs
ON/OFF
button
Page 4 of 8