Behringer EUROPOWER PMP6000 Quick Start Manual

Powered Mixers
EUROPOWER
PMP6000/PMP4000
PMP1680S
1600-Watt 10/16/20-Channel Powered
Mixer with Multi-FX Processor and
FBQ Feedback Detection System
Ultra-compact 2 x 800-Watt stereo
powered mixers
(1600 Watt bridged mode)
Revolutionary Class-D amplifi er
technology: enormous power,
incredible sonic performance and
super-light weight
Ultra-compact design at nearly
half the weight of conventional
powered mixers
PMP6000: 20-channel mixer
section features 12 mono and
4 stereo channels plus separate
CD/Tape input/output
PMP4000: 16-channel mixer
section features 8 mono
and 4 stereo channels plus
separate CD/Tape input/output
PMP1680S: 10-channel mixer
section features 6 mono and
2 stereo channels plus separate
CD/Tape input/output
PMP6000, PMP1680S: Dual
studio-grade 24-bit stereo FX
processors with 100 awesome
presets including reverb, chorus,
fl anger, delay, pitch shifter and
various multi-eff ects
PMP4000: Studio-grade 24-bit
stereo FX processor with 100
awesome presets including reverb,
chorus, fl anger, delay, pitch shifter
and various multi-eff ects
Revolutionary FBQ Feedback
Detection system instantly reveals
critical frequencies for easy
feedback removal
behringer.com
The new BEHRINGER PMP Powered
Mixers (2 x 800-Watt stereo, 1600-Watt
bridged mode) produce even more power
than their predecessors while maintaining
a famously low weight and high effi ciency.
These mixers employ Class-D technology
including a new switch-mode power
supply, signifi cantly reducing weight and
heat. The 20-channel PMP6000 features
12 built-in XENYX preamps, the
16-channel PMP4000 features 8 built-in
XENYX mic preamps, and the 10-Channel
PMP1680S features 8 high-quality
built-in mic preamps. All three models
feature 24-bit FX processors, stereo
7-band graphic EQ and our renowned
FBQ Feedback Detection System.
What is Class-D Technology?
Instead of operating relatively
continuously like Class AB circuits,
Class-D amps switch on and off thousands
of times per second, delivering power
only when needed. In other words, the
amplifi er is either fully on or fully off , which
signifi cantly reduces power losses from the
output devices given off as heat. Less heat
means our amps don't need massive heat
sinks, and that means we can make them
lighter. Our no-compromise design means
the new PMP mixers will deliver full power
with incredible fi delity all night long,
without the need for lengthy rest cycles.
When used in conjunction with
switching-mode power supplies, which
don't require huge and heavy transformers,
our Class-D amplifi ers provide tremendous
dynamic punch and superior fi delity.
The resulting speaker systems are much
lighter, making them easy to transport
and set up.
Continued on next page