Emerson Bettis BHH Series Installation, Operation And Maintenance Manual page 42

Section 11: BHH Re-Mounting
December 2019
1. Yoke must easily fit into the hole.
1. The assembled actuator shall be able to operate
with air, approx. 3 bar. Check that it is operating 90˚.
37
Installation, Operation and Maintenance Manual
Mounting of Yoke
2. Mount the Yoke.
Final Test
2. Finally, the actuator shall be tested hydraulically.
MAN-02-05-62-0742-EN Rev. 0
BHH Re-Mounting