User Warning Message; Could Not Perform The Operation Because The Memory Is Full." Is Displayed; Scanning Will Be Canceled Because The Memory Is Full. Wait A Moment, Then Try Again." Is Displayed; Scanning Will Be Canceled Because The Memory Is Full. Do You Want To Print (Send, Store)* The Scanned Pages?" Is Displayed - Canon imagePRESS C800 Series Troubleshooting Manual

Chapter 1
2-13)Check for disconnection of J2511[1] of the lower neat stack unit return roller lifting motor. If no connector is disconnected, check other factors (disconnection
of cable and motor etc.).
2-14)Reassemble the parts in reverse order from the step 2-12) to 2-3).
3)Deliver a sheet of A4 or LTR paper into the tray A and tray B respectively to confirm if the symptom does not occur.
[Reference] Delivery tray can be switched from the following setting: Settings/Registration > Preferences > Function Settings > Common > Paper Feed Settings >
"Output Tray Setting"
4)If the symptom does not improve, then check other factors.

1.1.3.3 User Warning Message

1.1.3.3.1 "Could not perform the operation because the memory is full." is displayed

[ Inspected by Canon Inc. ]
Description
If memory becomes full during scanning, the following messages appear on the touch panel display.
"Could not perform the operation because the memory is full."
Field Remedy
Delete unnecessary data from memory, and then scan the whole pages again.
[Reference]
Delete the unnecessary files stored in the Mail Box and Fax/I-Fax Inbox in the case of frequent display of memory full.

1.1.3.3.2 "Scanning will be canceled because the memory is full. Wait a moment, then try again." is displayed

[ Inspected by Canon Inc. ]
Description
If memory becomes full during scanning, the following messages appear on the touch panel display.
"Scanning will be canceled because the memory is full. Wait a moment, then try again."
Field Remedy
Scan the whole pages again after the current operation is complete.
[Reference]
Delete the unnecessary files stored in the Mail Box and Fax/I-Fax Inbox in the case of frequent display of memory full.
1.1.3.3.3 "Scanning will be canceled because the memory is full. Do you want to print (send, store)* the scanned pages?"
is displayed
[ Inspected by Canon Inc. ]
Description
If memory becomes full during scanning, the following messages appear on the touch panel display.
"Scanning will be canceled because the memory is full. Do you want to print (send, store) the scanned pages?"
Field Remedy
Follow the procedures on the screen.
- Yes: A job for the pages scanned into memory is processed. After processing the job, scan the remaining pages.
1-50
0031-6801
0031-6802
0031-6803