How To Load Pre-Punched Paper; How To Load Transparencies - Canon imagePRESS C800 Series Troubleshooting Manual

[Caution] Select the correct type of envelope. Selecting an incorrect size may cause a paper jam.
8) Press "OK".
[Caution]
- If settings for the loaded paper is incorrectly entered, remove and load paper again to the Stack Bypass-B1 and then specify settings again.
- Empty the output tray once 10 envelopes are delivered.
- When printing on envelopes, printed envelopes may be creased.

1.1.7.1.18 How to load pre-punched paper

[ Manual-related ]
Description
Please explain how to load pre-punched paper.
Field Remedy
This is different for each pickup location.
- Paper drawers of the main unit: Load paper with the side to print facing down.
- Stack Bypass-B1, POD Deck Lite-B1, or Multi-drawer Paper Deck-B1: Load paper with the side to print facing up.
[Caution]
- When loading pre-punched paper, take note of the orientation of the binding holes and the image.
- If printing on only 1 side, select and set Main Menu > Copy > Options > Finishing > Face Up/Face Down > Face Up (Reverse Order).
- If the printed side need to be output on the reverse side (face down), select Main Menu > Copy > Select Paper, and then plain paper in the horizontal placement.

1.1.7.1.19 How to load Transparencies

[ Manual-related ]
Description
Please explain how to load Transparencies.
Field Remedy
This is different for each pickup location.
- Paper drawers of the main unit: Load Transparencies with the side to print facing down.
- Stack Bypass-B1, POD Deck Lite-B1, or Multi-drawer Paper Deck-B1: Load Transparencies with the side to print facing up.
[Caution]
- Transparencies have a front and back side. Load Transparencies correctly to achieve sharp printing results.
- You can load only LTR or LTRR size Transparencies into the paper drawer, stack Bypass-B1, POD Deck Lite-B1, or Multi-drawer paper Deck- B1. If you copy/
print using LTR size Transparencies, the gloss unevenness may occur. This unevenness may disappear if you use LTRR size transparencies.
- You cannot load the Transparencies into the Document Insertion Unit-M1.
- When loading Transparencies, make sure to hold only the edges of the sheets and avoid touching the print surface.
- Do not load Transparencies while the machine is printing. Doing so may cause a paper jam.
Chapter 1
0031-5492
0031-5493
1-101