Figure 26 Wizard Step 3: Pptp Connection; Table 15 Wizard Step 3: Pptp Connection - ZyXEL Communications P-335U User Manual

Figure 26 Wizard Step 3: PPTP Connection

The following table describes the fields in this screen

Table 15 Wizard Step 3: PPTP Connection

LABEL
ISP Parameters for Internet Access
Connection Type
User Name
Password
PPTP Configuration
Get automatically
from ISP
Use fixed IP
address
My IP Address
My IP Subnet
Mask
Server IP Address
Connection ID/
Name
Back
Next
Exit
Chapter 3 Connection Wizard
DESCRIPTION
Select PPTP from the drop-down list box. To configure a PPTP client, you must
configure the User Name and Password fields for a PPP connection and the
PPTP parameters for a PPTP connection.
Type the user name given to you by your ISP.
Type the password associated with the User Name above.
Select this radio button if your ISP did not assign you a fixed IP address.
Select this radio button, provided by your ISP to give the ZyXEL Device a fixed,
unique IP address.
Type the (static) IP address assigned to you by your ISP.
Type the subnet mask assigned to you by your ISP (if given).
Type the IP address of the PPTP server.
Enter the connection ID or connection name in this field. It must follow the "c:id"
and "n:name" format. For example, C:12 or N:My ISP.
This field is optional and depends on the requirements of your ISP.
Click Back to return to the previous screen.
Click Next to continue.
Click Exit to close the wizard screen without saving.
P-334U/P-335U User's Guide
59