ZyXEL Communications P-335U User Manual page 109

Table 37 Advanced LAN
LABEL
Allow between LAN
and WAN
Apply
Reset
Chapter 7 LAN
DESCRIPTION
Select this check box to forward NetBIOS packets from the LAN to the WAN
and from the WAN to the LAN. If your firewall is enabled with the default policy
set to block WAN to LAN traffic, you also need to enable the default WAN to
LAN firewall rule that forwards NetBIOS traffic.
Clear this check box to block all NetBIOS packets going from the LAN to the
WAN and from the WAN to the LAN.
Click Apply to save your changes back to the ZyXEL Device.
Click Reset to begin configuring this screen afresh.
P-334U/P-335U User's Guide
109