Telnet; Telnet Screen; Figure 110 Telnet Remote Management; Table 71 Telnet Remote Management - ZyXEL Communications P-335U User Manual

Table 70 WWW Remote Management
LABEL
Secured Client IP
Address
Apply
Reset

16.3 Telnet

You can use Telnet to access the ZyXEL Device. Specify which interfaces allow Telnet access
and from which IP address the access can come.

16.4 Telnet Screen

To change your ZyXEL Device's Telnet settings, click Management > Remote MGMT >
Telnet. The following screen displays. Use this screen to specify which interfaces allow
Telnet access and from which IP address the access can come.

Figure 110 Telnet Remote Management

The following table describes the labels in this screen.

Table 71 Telnet Remote Management

LABEL
Server Port
Server Access
Chapter 16 Remote Management Screens
DESCRIPTION
A secured client is a "trusted" computer that is allowed to communicate with the
ZyXEL Device using this service.
Select All to allow any computer to access the ZyXEL Device using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the ZyXEL Device using this service.
Click Apply to save your customized settings and exit this screen.
Click Reset to begin configuring this screen afresh.
DESCRIPTION
You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
Select the interface(s) through which a computer may access the ZyXEL Device
using this service.
P-334U/P-335U User's Guide
187