ZyXEL Communications Prestige 660W/HW Series Compact Manual page 38

Prestige 660W/HW Series Compact Guide
Figure 23 Adding/Editing Source and Destination Addresses
The following table describes the labels in this screen.
Table 9 Adding/Editing Source and Destination Addresses
LABEL
Address Type Do you want your rule to apply to packets with a particular (single)
IP address, a range of IP addresses (e.g., 192.168.1.10 to
192.169.1.50), a subnet or any IP address? Select an option from
the drop down list box
Start IP Enter the single IP address or the starting IP address in a range
Address here.
End IP Enter the ending IP address in a range here.
Address
Subnet Mask Enter the subnet mask here, if applicable.
DESCRIPTION
38