ZyXEL Communications Prestige 660W/HW Series Compact Manual page 23

Prestige 660W/HW Series Compact Guide
Figure 13 Wizard: LAN Configuration
From the DHCP Server drop-down list box, select On to allow your Prestige to assign IP
addresses, an IP default gateway and DNS servers to computer systems that support the
DHCP client. Select Off to disable DHCP server.
When DHCP server is used, set the following items:
Specify the first of the contiguous addresses in the IP address pool in the Client IP Pool
Starting Address field.
Specify the size or count of the IP address pool in the Size of Client IP Pool field.
Enter the IP address(es) of the DNS server(s) in the Primary DNS Server and/or
Secondary DNS Server fields.
Step 6.
The Prestige automatically tests the connection to the computer(s)
connected to the LAN ports. To test the connection from the Prestige
to the ISP, click Start Diagnose. Otherwise click Return to Main
Menu to go back to the Site Map screen.
Enter the IP address of your Prestige in
dotted decimal notation in the LAN IP
Address field. For example,
192.168.1.1 (factory default).
If you change the
Prestige's LAN IP
address, you must use
the new IP address if
you want to access the
web configurator
again.
Enter a subnet mask in dotted decimal
notation in the LAN Subnet Mask field.
23