Starting Otist; Figure 48 Example Wireless Client Otist Screen; Figure 49 Security Key; Figure 50 Otist In Progress (Ap) - ZyXEL Communications 802.11g Wireless Access Point ZyXEL G-560 User Manual

Figure 48 Example Wireless Client OTIST Screen

6.18.2 Starting OTIST

Note: You must click Start in the AP OTIST web configurator screen and in the
wireless client(s) Adapter screen all within three minutes (at the time of
writing). You can start OTIST in the wireless clients and AP in any order but
they must all be within range and have OTIST enabled.
1 In the AP, a web configurator screen pops up showing you the security settings to
transfer. After reviewing the settings, click OK.

Figure 49 Security Key

2 This screen appears while OTIST settings are being transferred. It closes when the
transfer is complete.

Figure 50 OTIST in Progress (AP)

• In the wireless client, you see this screen if it can't find an OTIST-enabled AP (with the
same Setup key). Click OK to go back to the ZyXEL utility main screen.
Chapter 6 Wireless Screens
ZyXEL G-560 User's Guide

Figure 51 OTIST in Progress (Client)

83