Logs; Figure 55 Management: Logs; Table 22 Management: Logs - ZyXEL Communications 802.11g Wireless Access Point ZyXEL G-560 User Manual

ZyXEL G-560 User's Guide
Table 21 Management: Password (continued)
LABEL
Retype to Confirm Retype your new system password for confirmation.
Apply
Cancel

7.3 Logs

The web configurator allows you to look at all of the G-560's logs in one location.
Click SETTINGS > MANAGEMENT > Logs to open the Logs screen.
You can view logs and alert messages in this page. Once the log table is full, old logs are
deleted as new logs are created.
Click a column heading to sort the entries. A triangle indicates the direction of the sort order.

Figure 55 Management: Logs

The following table describes the labels in this screen.

Table 22 Management: Logs

LABEL
Display
Refresh
Clear Log
#
Time
Message
Source
86
DESCRIPTION
Click Apply to save your changes back to the G-560.
Click Cancel to reload the previous configuration for this screen.
DESCRIPTION
Select a category of logs to view.
Click Refresh to renew the log screen.
Click Clear Log to clear all the logs.
This is the log's index number.
This field displays the time the log was recorded.
This field states the reason for the log.
This field lists the source IP address and the port number of the incoming packet
that caused the log.
Chapter 7 Management Screens