Wep; Figure 42 Wireless Security: Wep; Table 14 Wireless Security: Disable; Table 15 Wireless Security: Wep - ZyXEL Communications 802.11g Wireless Access Point ZyXEL G-560 User Manual

The following table describes the labels in this screen.

Table 14 Wireless Security: Disable

LABEL
Encryption Method Select Disable to have no wireless LAN security configured.
Apply
Reset

6.16.2 WEP

WEP provides a mechanism for encrypting data using encryption keys. Both the AP and the
wireless stations must use the same WEP key to encrypt and decrypt data. Your G-560 allows
you to configure up to four 64-bit, 128-bit or 256-bit WEP keys, but only one key can be used
at any one time.

Figure 42 Wireless Security: WEP

The following table describes the labels in this screen.

Table 15 Wireless Security: WEP

LABEL
Encryption Method Select WEP if you want to configure WEP encryption parameters.
Authentication
Type
WEP Encryption
Chapter 6 Wireless Screens
DESCRIPTION
Click Apply to save your changes back to the G-560.
Click Reset to begin configuring this screen afresh.
DESCRIPTION
Select Auto, Open or Shared from the drop-down list box.
Select 64-bit WEP, 128-bit WEP or 256-bit WEP to enable data encryption.
ZyXEL G-560 User's Guide
75