Chapter 36 Internet Access; Introduction To Internet Access Setup; Ethernet Encapsulation; Figure 286 Menu 4: Internet Access Setup (Ethernet) - ZyXEL Communications 35 Series User Manual

This chapter shows you how to configure your ZyWALL for Internet access.

36.1 Introduction to Internet Access Setup

Use information from your ISP along with the instructions in this chapter to set up your
ZyWALL to access the Internet. There are three different menu 4 screens depending on
whether you chose Ethernet, PPTP or PPPoE Encapsulation. Contact your ISP to
determine what encapsulation type you should use.
Note: This menu configures WAN 1 on a ZyWALL with multiple WAN ports. Configure
the WAN 2 port in Menu 11.2 - Remote Node Profile or in the WAN WAN 2
screen via the web configurator.

36.2 Ethernet Encapsulation

If you choose Ethernet in menu 4 you will see the next menu.

Figure 286 Menu 4: Internet Access Setup (Ethernet)

Chapter 36 Internet Access

C
H A P T E R
Internet Access
Menu 4 - Internet Access Setup
ISP's Name= WAN_1
Encapsulation= Ethernet
Service Type= Standard
My Login= N/A
My Password= N/A
Retype to Confirm= N/A
Login Server= N/A
Relogin Every (min)=
IP Address Assignment= Dynamic
IP Address= N/A
IP Subnet Mask= N/A
Gateway IP Address= N/A
Network Address Translation= SUA Only
Press ENTER to Confirm or ESC to Cancel:
ZyWALL 5/35/70 Series User's Guide
N/A
3 6
532