Main Menu - ZyXEL Communications 35 Series User Manual

Table 181 Main Menu Commands
OPERATION KEYSTROKES
Move to a
"hidden"
menu
Move the
cursor
Entering
information
Required
fields
N/A fields
Save your
configuration
Exit the SMT

32.3.1 Main Menu

After you enter the password, the SMT displays the ZyWALL Main Menu, as shown next.
This guide uses the ZyWALL 70 menus as an example. The menus may vary slightly for
different ZyWALL models. Not all fields or menus are available on all models.
Chapter 32 Introducing the SMT
DESCRIPTION
Press [SPACE Fields beginning with "Edit" lead to hidden menus and have a
BAR] to change No default setting of No. Press [SPACE BAR] to change No to Yes,
to Yes then press and then press [ENTER] to go to a "hidden" menu.
[ENTER].
[ENTER] or [UP]/ Within a menu, press [ENTER] to move to the next field. You can
[DOWN] arrow also use the [UP]/[DOWN] arrow keys to move to the previous and
keys the next field, respectively.
When you are at the top of a menu, press the [UP] arrow key to
move to the bottom of a menu.
Fill in, or press You need to fill in two types of fields. The first requires you to type
[SPACE BAR], in the appropriate information. The second allows you to cycle
then press through the available choices by pressing [SPACE BAR].
[ENTER] to select
from choices.
<? > All fields with the symbol <?> must be filled in order be able to
save the new configuration.
<N/A> Some of the fields in the SMT will show a <N/A>. This symbol
refers to an option that is Not Applicable.
[ENTER] Save your configuration by pressing [ENTER] at the message
"Press ENTER to confirm or ESC to cancel". Saving the data on
the screen will take you, in most cases to the previous menu.
Make sure you save your settings in each screen that you
configure.
Type 99, then Type 99 at the main menu prompt and press [ENTER] to exit the
press [ENTER]. SMT interface.
ZyWALL 5/35/70 Series User's Guide
502