Figure 44 Wlan Port Role Example; Figure 45 Bridge Port Roles; Table 29 Bridge Port Roles - ZyXEL Communications 35 Series User Manual

ZyWALL 5/35/70 Series User's Guide

Figure 44 WLAN Port Role Example

To change your ZyWALL's port role settings, click NETWORK, BRIDGE and then the Port
Roles tab. The screen appears as shown.
The radio buttons on the left correspond to Ethernet ports on the front panel of the ZyWALL.
Ports 1 to 4 are all DMZ ports on the ZyWALL 70 and all LAN ports on the ZyWALL 5 or
ZyWALL 35 by default. The radio buttons on the right are for the WLAN card.

Figure 45 Bridge Port Roles

The following table describes the labels in this screen.

Table 29 Bridge Port Roles

LABEL
LAN
DMZ
127
DESCRIPTION
Select a port's LAN radio button to use the port as part of the LAN. The port will
use the LAN IP address and MAC address.
Select a port's DMZ radio button to use the port as part of the DMZ. The port will
use the DMZ IP address and MAC address.
Chapter 6 Bridge Screens