Pptp Encapsulation - ZyXEL Communications ZyXEL ZyWALL 50 User Manual

ZyWALL 50 Internet Security Gateway
FIELD
Encapsulation
Service Type
Note: xDSL users must choose the Standard option only. The Server IP, My Login IP and My
Password fields are not applicable in this case.
My Login Name
My Password
Login Server IP
IP Address Assignment
IP Address
IP Subnet Mask
Gateway IP Address
Network Address
Translation
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to Confirm..." to save
your configuration, or press [ESC] at any time to cancel.

6.1.2 PPTP Encapsulation

Point-to-Point Tunneling Protocol (PPTP) is a network protocol that enables secure transfer of data from a
remote client to a private server, creating a Virtual Private Network (VPN) using TCP/IP-based networks
PPTP supports on-demand, multi-protocol, and virtual private networking over public networks, such as the
Internet.
6-2
Table 6-1 Internet Access Setup Menu Fields
Press [SPACE BAR] and then press [ENTER] to choose Ethernet. The
encapsulation method influences your choices for IP Address.
Press [SPACE BAR] to select Standard, RR-Toshiba (RoadRunner Toshiba
authentication method) or RR-Manager (RoadRunner Manager
authentication method). Choose a RoadRunner flavor if your ISP is Time
Warner's RoadRunner; otherwise choose Standard.
Enter the login name given to you by your ISP.
Enter the password associated with the login name above.
The ZyWALL will find the RoadRunner Server IP if this field is left blank. If it
does not, then you must enter the authentication server IP address.
If your ISP did not assign you a fixed IP address, select Dynamic, otherwise
select Static and enter the IP address & subnet mask in the following fields.
Enter the (fixed) IP address assigned to you by your ISP (Static IP Address
Assignment is selected in the previous field).
Enter the subnet mask associated with your static IP.
Enter the gateway IP address associated with your static IP.
Please see the NAT chapter for a more detailed discussion on the Network
Address Translation feature. The choices are Full Feature, None and SUA
Only.
DESCRIPTION
Internet Access