System Information And Console Port Speed - ZyXEL Communications ZyXEL ZyWALL 50 User Manual

Table 17-1 System Maintenance — Status Menu Fields
FIELD
Cols
Tx B/s
Rx B/s
Up Time
Ethernet Address
IP Address
IP Mask
DHCP
System up Time
Name
Routing
ZyNOS F/W Version
You may enter 1 to drop the WAN connection, 9 to reset the counters or [ESC] to return to menu 24.

17.2 System Information and Console Port Speed

This section describes your system and allows you to choose different console port speeds. To get to the
System Information and Console Port Speed:
Step 1. Enter 24 to go to Menu 24 – System Maintenance.
Step 2. Enter 2 to open Menu 24.2 - System Information and Console Port Speed.
Step 3.
From this menu you have two choices as shown in the next figure:
System Information & Diagnosis
The number of collisions on this port.
Shows the transmission speed in Bytes per second on this port.
Shows the reception speed in Bytes per second on this port.
Total amount of time the line has been up.
The Ethernet address of the port listed on the left.
The IP address of the port listed on the left.
The IP mask of the port listed on the left.
The DHCP setting of the port listed on the left.
The total time the ZyWALL has been on.
This is the ZyWALL's system name + domain name assigned in menu 1. e.g.,
System Name= xxx; Domain Name= baboo.mickey.com.
Name= xxx.baboo.mickey.com
This field refers to the routing protocol used.
The ZyNOS Firmware version and the date created.
ZyWALL 50 Internet Security Gateway
DESCRIPTION
17-3