Ip Alias Setup; Table 5-4 Lan Tcp/Ip Setup Menu Fields - ZyXEL Communications ZyXEL ZyWALL 50 User Manual

FIELD
DHCP Server If Relay is selected in the DHCP field above, then type in the IP address of
Address the actual, remote DHCP server here.
Follow the instructions in the following table to configure TCP/IP parameters for the LAN port.
FIELD
TCP/IP Setup:
IP Address Enter the IP address of your ZyWALL in dotted decimal notation
IP Subnet Mask Your ZyWALL will automatically calculate the subnet mask based on
the IP address that you assign. Unless you are implementing
subnetting, use the subnet mask computed by the ZyWALL.
RIP Direction Press [SPACE BAR] to select the RIP direction. Options are: Both,
In Only, Out Only or None.
Version Press [SPACE BAR] to select the RIP version. Options are:
RIP-1, RIP-2B or RIP-2M.
Multicast IGMP (Internet Group Multicast Protocol) is a session-layer protocol
used to establish membership in a Multicast group. The ZyWALL
supports both IGMP version 1 (IGMP-v1) and version 2 (IGMP-v2).
Press [SPACE BAR] to enable IP Multicasting or select None
(default) to disable it.
Edit IP Alias The ZyWALL supports three logical LAN interfaces via its single
physical Ethernet interface with the ZyWALL itself as the gateway
for each LAN network. Press [SPACE BAR] to select Yes, then
press [ENTER] to display menu 3.2.1
When you have completed this menu, press [ENTER] at the prompt [Press ENTER to Confirm...] to save
your configuration, or press [ESC] at any time to cancel.

5.4.1 IP Alias Setup

Use menu 3.2 to configure the first network. Move the cursor to the Edit IP Alias field, press [SPACE
BAR] to choose Yes and press [ENTER] to configure the second and third network.
Pressing [ENTER] opens Menu 3.2.1 - IP Alias Setup, as shown next.
LAN Setup
Table 5-3 DHCP Ethernet Setup Menu Fields
DESCRIPTION

Table 5-4 LAN TCP/IP Setup Menu Fields

DESCRIPTION
ZyWALL 50 Internet Security Gateway
255.255.255.0
EXAMPLE
EXAMPLE
192.168.1.1
(default)
Both
(default)
RIP-1
(default)
None
Yes
5-7