Figure 63 Menu 2.1Traffic Redirect Setup; Table 39 Menu 2.1Traffic Redirect Setup - ZyXEL Communications ADSL2+ Ethernet Gateway P-660R-T Series User Manual

Figure 63
The following table describes the fields in this menu.

Table 39 Menu 2.1Traffic Redirect Setup

FIELD
Active.
Configuration
Backup Gateway
IP Address
Metric
When you have completed this menu, press [ENTER] at the prompt "
or ESC to Cancel:
Chapter 15 Menu 2 WAN Backup Setup
Menu 2.1Traffic Redirect Setup
Menu 2.1 - Traffic Redirect Setup
Active= No
Configuration:
Backup Gateway IP Address= 0.0.0.0
Metric= 15
Press ENTER to Confirm or ESC to Cancel:
DESCRIPTION
Press [SPACE BAR] and select Yes (to enable) or No (to disable) traffic redirect
setup. The default is No
Enter the IP address of your backup gateway in dotted decimal notation.
The Prestige automatically forwards traffic to this IP address if the Prestige's
Internet connection terminates.
This field sets this route's priority among the routes the Prestige uses.
The metric represents the "cost of transmission". A router determines the best route
for transmission by choosing a path with the lowest "cost". RIP routing uses hop
count as the measurement of cost, with a minimum of "1" for directly connected
networks. The number must be between "1" and "15"; a number greater than "15"
means the link is down. The smaller the number, the lower the "cost"
" to save your configuration, or press [ESC] at any time to cancel.
P-660R-T Series User's Guide
Press ENTER to Confirm
130