Horizon I Or Sport Traffic Display; Hxr Traffic Display - Garmin GTX 330 Series Manual

Equipment supplement

Hide thumbs Also See for GTX 330 Series:

Table of Contents

Garmin GTX 330 Series Supplement

4.3 Horizon I or Sport Traffic Display

When enabled in the Setup Menu (see Section 3) and in range of services, traffic is displayed on

the Moving Map page. When targets are detected within 2 nm of your position, a dedicated Traffic

Alert window will appear automatically on the Map or PFD display. The word TRAFFIC appears in

the lower right corner of the screen in green or yellow, as described below, to indicate service.

To Activate Traffic Inset:

1. Press INSET softkey on either the lower Left or Right side of screen.

2. Press TRAFFIC softkey.

3. Press either 2, 6, or 12 softkey (lower left side) to select Inset map range. Range value is the

diameter of inset ring.

4. If no Traffic inset is active, but the EFIS is receiving traffic information, a Traffic inset popup

window will automatically appear if a target appears within 2 nm of your position.

Revision A

Traffic Service Indicator

Green=Receiving Information

Yellow=No Service/Searching

Traffic Inset

Ÿ L or R corner of screen

Ÿ 2, 6 or 12 nm Range

Ÿ HDG Up

NOTE: RNG softkeys

control full-screen

map range, not Inset.

GRT Avionics

GTX 330-8

Table of Contents