The Storage Screen - ZyXEL Communications NSA210 User Manual

7.4 The Storage Screen

The Storage screen allows you to create and edit volumes in the NSA.
Click Storage > Volume in the navigation panel to display the following screen.
Use this screen to display SATA (internal) and USB (external) volumes on the
NSA.
Note: It is recommended to scan the volume every three months or 32 reboots.
Figure 46 Storage > Volume
The following table describes the labels in this screen.
Table 19 Storage > Volume
LABEL
SATA/USB Volume
Create a SATA Volume
Create a USB Volume
Status
Volume
Disk Configuration
NSA210 User's Guide
DESCRIPTION
These tables display information on all internal SATA volumes
(created on NSA internal disk drives) and external volumes
(created on external disk drives attached to the NSA USB ports).
Click this to format internal hard drives and create a new
volume. All data on the disk(s) will be lost.
Click this to format an external hard drive and create a new
volume. All data on the disk will be lost.
This field shows whether the volume is Healthy, Resync,
Recovering, Degraded, or Down. See
155 for details on a volume's status.
The NSA creates the volume name automatically. You can edit
it.
This field shows which disks and data storage system the
volume is using.
Chapter 7 Storage
Section 7.5.3 on page
147