Call Park / Call Pickup - ZyXEL Communications P-2302R-P1C Support Notes

P2302R-P1C Support Notes
Enable early media in web configuration: VOIP>Advanced Settings

Call Park / Call Pickup

Call Park/Pickup function allows you to place a call on hold first, then it can be retrieved from another phone in
the system.
For example, if you are on an active call at your phone, you can park the call by press *97# + park number.
Someone on another phone in the system can then dial the call park number to pick-up the call.
Note: The caller must still pay while the call is parked.
When you park the call, you enter a number of your choice (Up to eight digits), which you must enter again
when you pick up the call. If you do not enter the correct number, you cannot pickup the call. This means that
94
All contents Copyright  2007 ZyXEL Communications Corporation.