Using The Control Switches For Rtm - Zoom 8080 Operation Manual

Using the CONTROL switches for RTM

The CONTROL switches can be used with the RTM function to alter parameters in discrete steps. This lets you
easily and quickly adjust distortion or overdrive intensity, flanger speed etc. during a performance.
To use the CONTROL switches for adjusting effect parameters, the following steps are required.
• In the TOTAL module, select the effect module to be assigned to the CONTROL switches.
• If desired, within the selected effect module, select the parameter to be controlled.
Display
FINE TUNE
COMP EFF1 DIST EQ EFF2 EFF3 DLY
STORE GROUP EDIT UTILITY
(EXECUTE) COMPARE EXIT PAGE
ADVANCED GUITAR EFFECTS PROCESSOR
BANK
CONTROL
PEDAL
1 In Play mode, press
EDIT/EXIT key
the .
2
Press the
UTILITY/PAGE key
once.
3
Data entry knob
Use
select the effect
module to be
assigned to the
CONTROL switches
.
For effect types where the RTM destination can be changed (some effect types in effect modules EFF2 and EFF3), the
NO
parameter to be controlled can be selected at the RTM page for that module (
Among the effect types of the DLY module, the RTM page has a
dedicated parameter for the CONTROL switches called "CSW" (CSW
mode select). This allows use of the CONTROL switches separately
from the "RTM" (RTM destination) item (
26
CONTROL
SWITCH
INDICATOR
MAX
MIN MAX 1 2 MIN MAX
3 4
1/2 INCREASE
MIN MAX MIN MAX
REV TOTAL
CONTROL
– TYPE + MIN SWITCH
BLINK
(DLY:TAP)
PRESENCE OUTPUT
DECREASE
–(TAP/HOLD)
USER
FUNCTION
The 8080 enters the Edit mode. If
the TOTAL key is not flashing, press
the TOTAL key to select the TOTAL
parameters.
CSW is the parameter for selecting
2 to the item to be adjusted by the
CONTROL switches.
p. 60).
EDIT/EXIT key
1
TOTAL key
3
Data entry knob 2
CONTROL
PEDAL
5
CONTROL SWITCH
INDICATOR
2
UTILITY/PAGE key
4
STORE/EXECUTE key
p. 55).
RTM page of DLY module
DLY
Parameters adjusted by CONTROL switches
EDIT
EXIT
TOTAL
MIN MAX
CONTROL
SWITCH
INDICATOR
MAX CONTROL switches
(INCREASE/DECREASE)
1/2
MIN
BLINK
(DLY:TAP)
UTILITY
PAGE
STORE
(EXECUTE)
SERIAL/PARALLEL:
1 EF2 å EF3
CONTROL SET: CSW=DST
2 CP1=VOL CP2=OFF
CONTROL SET: CSW=EF1
é 2 CP1=VOL CP2=OFF
HiD= 0 TYP= MN
RTM Mix CSW=Tap
INCREASE
CONTROL
SWITCH
DECREASE
–(TAP/HOLD)