Turning On And Off The Amplifier Simulator; Adjusting The Master Volume Control - Zoom 9000 Operation Manual

Turning On and Off of the Amplifier Simulator
The 9000 is equipped with the amplifier simulator function for obtaining bright sound
when played back with a high-fidelity audio amplifier system.
· In the Play mode, press the AMP/LINE key.
Every time you press the AMP/LINE key, "LINE" and "AMP" on the display switches
by turn. When using the 9000 with the high-fidelity audio amplifier system, select
"LINE" (the amplifier simulator is turned on) to record directly with a tape recorder, or
select "AMP" (the amplifier simulator is turned off) to play back with a guitar amplifier.
VOL 100

Adjusting the Master Volume Control

· In the Play mode, hold down the VALUE - / + key(s)
The master volume value shown on the display changes.. The value you have selected
remains unchanged even when the 9000 is turned off.
VOL 100
Note:
The master volume control is effective on all the Patches. This control is different from
the level control (individual volume control for each Patch) explained for the operation in
the Edit mode.
31
AMP/LINE
Selecting of the Amplifier Simulator
31
VALUE (down)
Changing the Master Volume Control
13
VOL 100
VOL 99
31
31