Panasonic KX-TG5631S Service Manual page 53

9.2.1. TDD Frame Format
Sync Field (72bit): Preamble 56bit + SyncWord 16bit
Base Unit (Handset) adjusts the timing of reception so that reception of Base Unit (Handset) can correspond to transmission
of Handset (Base Unit).
It is necessary for sync-field that Handset gets synchronization.
A - field (64bit): Each kinds of DATA: ch data, line condition, etc.
B - field (320bit + 80bit): Sound data + parity
Z - field (4bit): Parity Check
9.2.2. TDMA system
This system is the cycles of 10ms, and has four duplex paths,
so it is possible to perform four duplex communications simultaneously.
In 1 slot 1.25ms, the 10ms of voice data is transmitted.
Each slot makes every frame frequency hop. (100hops/sec.)
Although each slot (UpLink3 and UpLink4) uses different frequency, UpLink3 and DownLink3 use the same frequency.
• • • • 2 - Handsets Link
Traffic Bearer
A link is established between Base Unit and Handset.
The state where duplex communication is performed.
The hopping pattern of a 3000hops (30 seconds) cycle.
Dummy Bearer
The Base Unit sends Dummy-data to the all stand-by state Handsets.
The Handsets receive that data for keeping synchronization and monitoring request from the Base Unit.
Dummy Bearer doesn´t contain B-field (sound) data.
KX-TG5631S / KX-TG5632M / KX-TG5633B / KX-TGA560S / KX-TGA560M / KX-TGA560B
53