Fujitsu N7100 Consumable Replacement And Cleaning Instructions page 9

R R
EPLACING THE OLLER
4. Install a new pick roller on the scanner.
Insert the left end of the shaft into the slot of the scanner, and lower
the other end gradually.
5. Rotate the lock release tab on the shaft in the direction
of the arrow.
ATTENTION
Make sure that the pick roller is installed properly. Otherwise, paper
jams or other feeding errors may occur.
S ( .)
ET CONT
N7100 C R
ONSUMABLE EPLACEMENT AND
Pick Roller
Lock Release Tab
C I
LEANING NSTRUCTIONS
9