Fujitsu N7100 Consumable Replacement And Cleaning Instructions page 6

N7100 C R
ONSUMABLE EPLACEMENT AND
6
C I
LEANING NSTRUCTIONS
R R
EPLACING THE OLLER
5. Install the brake roller with the shaft on the scanner.
Fit the left end of the shaft in the slot, then install the rest of the shaft in
place.
6. Close the cover of the brake roller.
ATTENTION
ATTENTION
Make sure that the shaft is attached properly. If it is not correctly attached,
document jams and other feeding errors may occur.
Make sure that the shaft is attached properly. If it is not correctly attached,
document jams and other feeding errors may occur.
S ( .)
ET CONT
Brake Roller
Shaft