Fujitsu N7100 Consumable Replacement And Cleaning Instructions page 10

N7100 C R C I
ONSUMABLE EPLACEMENT AND LEANING NSTRUCTIONS
R R S ( .)
EPLACING THE OLLER ET CONT
6. Close the sheet guide.
Make sure that both ends of the sheet guide are locked firmly.
7. Close the LCD cover.
You should hear a click.
Be careful that the LCD cover does not shut on your fingers.
8. Connect the power cable, and turn on the scanner.
9. Reset the Roller Set usage counter.
After part replacement, the usage counter can be reset to return the part
status to normal.
1.Select [Usage Status] under [Status Details].
The [Usage Status] window appears.
2.Press the [Clear] button for the part replaced.
The counter reset confirmation window appears.
3.Press the [OK] button.
10