Fujitsu N7100 Consumable Replacement And Cleaning Instructions page 18

N7100 C R
ONSUMABLE EPLACEMENT AND
18
C I
LEANING NSTRUCTIONS
C I
LEANING NSIDE THE
The [Roller Cleaning] window appears.
4 Open the LCD cover.
5 Lightly press a soft cloth slightly moistened with Cleaner F1 or the
Cleaning Wipe against the surface of the rollers.
6 Press the [Cleaning] button on the [Roller Cleaning] window.
When the button is pressed, the feed rollers and eject rollers rotate
slightly.
Pressing the button continuously rotates the feed rollers and eject rollers
for a fixed amount every few seconds.
Gently clean the rollers as you rotate them. Take care not to damage the
soft rubber.
Stop pressing the button to stop the rollers rotating.
The pick rollers should be cleaned carefully and thoroughly, as black
residue on the rollers can adversely affect the paper pickup
HINT
Pressing the [Cleaning] button seven times rotates the feed rollers and eject
rollers approximately one complete revolution.
When Help is shown, close it before pressing the [Cleaning] button.
7 When you have finished cleaning the rollers, press the [OK] button, and
close the [Roller Cleaning] window.
ATTENTION
When cleaning the feed rollers or eject rollers, be careful not to touch the
rollers with your fingers while they are rotating.
Close the LCD cover.
You should hear a click.
S ( .)
CANNER CONT