Safety Labels - Land Pride Razor ZR44 Manual

Important Safety Information

Safety Labels

Your mower comes equipped with all safety labels in place.
They were designed to help you safely operate your implement.
Read and follow their directions.
1. Keep all safety labels clean and legible.
2. Replace all damaged or missing labels. To order new
labels go to your nearest Land Pride dealer.
3. Some new equipment installed during repair requires
safety labels to be affixed to the replaced component as
specified by Land Pride. When ordering new components
make sure the correct safety labels are included in the
request.
20668
4 ZR44 & ZR52 (S/N 472619 and below) Zero Turning Radius Mowers Riding Mowers 356-059M
Table of Contents
4. Refer to this section for proper label placement.
To install new labels:
a. Clean the area the label is to be placed.
b. Spray soapy water on the surface where the label is to
be placed.
c. Peel backing from label. Press firmly onto the surface.
d. Squeeze out air bubbles with the edge of a credit card.
20668
20669
Land Pride
838-303C
Danger: Battery
(Beneath Seat)
838-305C
Warning: Rollover Hazard
(Beneath Bumper on Back
of Frame)
838-306C
Warning: Do not operate
without deflector
7/16/07