Download Print this page

Land Pride ZR44 Assembly Instructions

Hour meter option
Hide thumbs Also See for ZR44:

Advertisement

Quick Links

Hour Meter Option
Assembly Instructions
ZR44 & ZR52 Mowers
Before You Start
When you see this symbol, the subsequent
!
instructions and warnings are serious - follow
without exception. Your life and the lives of
others depend on it!
IMPORTANT: Before you begin, read these
instructions and check to be sure all parts and tools
are accounted for. Please retain these installation
instructions for future reference and parts ordering
information.
Your Hour Meter Option is exclusively designed for your
Land Pride ZR44 & ZR52 Mower. Please read these
installation instructions and your ZR44 & ZR52 Mower
Operator's Manual thoroughly before beginning.
Especially read information relating to safety concerns.
Also included in the Operator's Manual is important
information on operation, adjustment, troubleshooting,
and maintenance for this attachment (some manual
sections do not apply to all accessories).
General Information
These assembly instructions apply to the following Hour
Neter Option Accessories listed below:
356-108A
HOUR METER/WIRE HARNESS-RAZOR

Further Assistance

Your dealer wants you to be satisfied with your new Hour
Meter Option. If for any reason you do not understand
any part of this manual or are not satisfied with the
service received, the following actions are suggested:
1. Discuss the matter with your dealership service
manager making sure he is aware of any problems
you may have and that he has had the opportunity to
assist you.
2. If you are still not satisfied, seek out the owner or
general manager of the dealership, explain the
problem and request assistance.
3. For further assistance write to:
Land Pride Service Department
1525 East North Street
P.O. Box 5060
Salina, Ks. 67402-5060
E-mail address
lpservicedept@landpride.com
© Copyright 2012
Printed
1/23/2012
Assembly Instructions
1. Park the tractor on a flat surface, set park brake, shut-
off engine, and remove ignition switch key. Disconnect
the negative battery cable.
Refer to Figure 1
2. Using a hammer and punch, remove the notched hour
meter tab on the tractor.
Tab
Tab
20882
Manual No. 356-109M
Punch
Figure 1
Tab Removal
356-109M

Advertisement

loading

Summary of Contents for Land Pride ZR44

  • Page 1: Further Assistance

    Your Hour Meter Option is exclusively designed for your Land Pride ZR44 & ZR52 Mower. Please read these installation instructions and your ZR44 & ZR52 Mower Operator’s Manual thoroughly before beginning. Especially read information relating to safety concerns.
  • Page 2 Manual No. 356-109M Refer to Figure 2 3. Locate the wire harness accessory connector on the right side of the tractor. Disconnect the male connec- tor from it. Refer to Figure 3 4. Remove the two terminal plugs inside the male con- nector.
  • Page 3 Refer to Figure 5 6. Insert the hour meter into the slot and place the mounting bracket on the underneath side to lock in place. Plug the male connector into the wire harness accessory connector. 7. Re-attach the negative battery cable. The unit is now ready to operate.
  • Page 4 Corporate Office: P.O. Box 5060 Salina, Kansas 67402-5060 USA www.landpride.com...

This manual is also suitable for:

Zr52