Activate/Deactivate Time Alarm; Snooze Alarm; Time Is Off By Hours - La Crosse Technology 308-179ORV2 Faqs

3. Hold the + or - buttons to adjust quickly.
4. Press the ALARM/SNOOZE button to confirm adjustments and move to the next item
or exit
Note: When no buttons are pressed for ten seconds, the temperature station will save the
last change and default back to normal mode

Activate/Deactivate time alarm

• The alarm is active when set.
• From normal time display, press and release the ALARM/SNOOZE button to deactivate
or activate the alarm. The alarm time will show for 2 seconds.
• Alarm icon and ALM ON will show then active
• ALM OFF will show when inactive.

Snooze Alarm

• When alarm sounds, press the ALARM/SNOOZE button to silence alarm for 10 minutes.
• The alarm icon will flash. SNZ will show and the remaining Snooze Time will count
down.
• Press any button except ALARM to silence the alarm for 24 hours

Time is off by hours

• This temperature station has manual set time.
• Use the program menu
Manually Set Time/Date: Program Menu
1. Hold the SET button 3 seconds to enter settings mode.
2. Press the + or - button to adjust the flashing values.
3. Hold the + or - buttons to adjust quickly.
4. Press the SET button to confirm adjustments and move to the next item.
Settings order:
• Beep ON/OFF
• 12/24 Hour Format
• Hour
• Minutes
• Year
• Month
• Date
• Month/Date, Date/Month
• Temperature Fahrenheit/Celsius
To begin:
La Crosse Technology, Ltd. www.lacrossetechnology.com/support
to set the time.
NOTE: In 24 hour format the AM/PM will
count seconds.
Page 10