9. Storage
10. Troubleshooting guide
Case 1. Starting failure
CHECK
fuel tank
fuel filter
carburetor adjustment screw ➞
sparking (no spark)
spark plug
Case 2. Engine starts but does not keep running/Hard re-starting.
CHECK
fuel tank
carburetor adjustment screw
muffler,cylinder (exhaust port) ➞ carbon is built-up
air cleaner
cylinder fin, fan cover
When your unit seems to need further service, please consult with our RedMax service shop in your area.
22
• Oil the blade to prevent rust.
• Empty the fuel tank and put the cap back on.
• Remove the spark plug, pour a small amount of
oil into the cylinder.
• Rotate the crankshaft several times using the
starting rope in order to distribute the oil. Put the
spark plug back in.
• Wrap the engine with a plastic sheet.
• Store the trimmer in a dry place, preferably not
in direct contact with the floor and away from
heat sources.
PROBABLE CAUSES
➞
incorrect fuel
➞
fuel filter is clogged
out of normal range
➞
spark plug is fouled/wet
➞
plug gap is incorrect
➞
disconnected
PROBABLE CAUSES
➞ incorrect fuel or staled fuel ➞
➞ out of normal range
➞ clogged with dust
➞ clogged with dust
ACTION
➞
drain it and with correct fuel
➞
clean
➞
adjust to normal range
➞
clean/dry
➞
correct (GAP: 0.6~0.7mm)
➞
retighten
ACTION
drain it and with correct fuel
➞
adjust to normal range
➞
wipe away
➞
wash
➞
clean