Zenoah CHTZ2400 Owner's/Operator's Manual page 16

7. Operation
OP7
OP8
16 
WARNING
• Weather conditions and altitude may effect
carburation.
• Do not allow anyone to stay close to the
hedge-trimmer while working or while
adjusting the carburetor.
■ HOW TO USE
HANDLE (CHTZ2400 only)
To reduce fatigue when trimming hadges, the
handle can be swivelled through 90° to the left or
right. (OP7, OP8).
Do not press the throttle during this operation!
Proceed as follows:
1. Free the handle by pressing the locking lever;
(OP7)
2. Turn the handle until the locking lever clicks into
place;
3. When the handle is locked in its new position,
you can apply the throttle again.
(1) handle
(2) locking lever
You can swivel the handle even with the engine
idling because the hedge-trimmer is equipped with
a blade brake that maintains the blades at a
standstill.