Honeywell Galaxy Manual page 11

Remote Port No.: The IP port number of the Ethernet module connected to the Galaxy control panel
should be entered in this field. The default is 10001.
Note: If connecting to a Galaxy Ethernet module this value should always be set to 10001.
Remote Password: This option provides increased security between the PC application and the
Galaxy panel. To establish connection the password entered in this field and the password stored in
the panel must match. By default the panel contains no password. The password must not be
entered when the site is first created. Entering a password without first programming a password at
the panel prevents Galaxy Gold from establishing contact with the Galaxy site. To assign a password
to the Galaxy control panel refer to the Program|New Password option in Galaxy Gold.
Click Finish on the Notes screen to save the details and to add the site to the grid.
Note: A warning will be displayed if the Control Panel Account Number, Remote Telephone Number or
Remote IP Address entered have been used in previous sites. A list of the sites where they are
used will be displayed.
Edit Site
The Edit Site option allows the details of a site to be modified. When this option is selected the Edit
Existing Site Details screen is displayed, as shown below. Use the Tab key to move between the fields and
make the required changes. Once all changes have been made press OK to save the new details.
Note: A warning will be displayed if the Account Number, Remote Telephone Number or Remote IP
Address entered have been used in previous sites.
Note: The Differences Between Versions tab is not implemented in this version of the software.
Page 7