Color Convergence Adjustment; Auto Convergence Adjustment - Zenith R40W46 Installation And Operating Manual

Color Convergence Adjustment

(R40W46, R40W46F, R45W46, R45W46F only)
Use this function to adjust the R-G-B color convergence while a stable
signal is being received. When the TV is first installed or if it is
relocated, the picture may be unstable with three color ghosts (red,
green, blue). This problem can be solved by adjusting the color
convergence.
1. Press the menu button and then use
Picture menu.
G
2. Press the and then use
G
3. Press the and then use
convergence) or
If the display is not white and shows three color ghosts, the color
convergence needs to be adjusted. If the
convergence does not need to be adjusted.
4. Press the G and then press the tv/video button.
The display button is selected in red or blue.
5. Only selecting
position your want to adjust the convergence.
F G
6. Use the D /
E
/ /
blue) over the green . It will be changed to yellow or cyan.
7. When both red and blue display is superimposed over green, the
display changes to white.
8. Press the exit button to return to TV viewing.
Note: If the picture needs to be adjusted more
convergence) adjustment, you can adjust the
convergence) for the position you want to adjust.

Auto Convergence Adjustment

(R50W46 and R57W46 only)
When the TV is first installed or relocated, the picture may be unstable
and have three color ghosts (red, green, blue). This problem can be
solved with Auto Convergence. This function can adjust the picture
color convergence automatically if the TV is receiving a stable signal.
1. Press the menu button and then use
Picture menu.
G
2. Press the and then use
G
3. Press the button to start auto convergence.
The color convergence order will be: blue, green, then red.
The auto convergence function takes about 60 seconds.
Notes: • Wait 20 minutes after turning on the TV before using Auto
Convergence.
• Darken the room before adjusting color convergence.
D /
E
D / button to select
E
D / button to select
E
(9 point convergence) .
display is white, color
: Use the number (0~9) button to select the
button to superimpose the
D /
E
D / button to select
E
button to select the
.
(all point
display (red or
(all point
(9 point
button to select the
.
19
Picture
EZ Video { {
CH.
{ {
DRP
{ {
Cinema
VM { {
{ {
ACC
{ {
Contrast
{ {
Brightness
Color { {
{ {
Sharpness
1
1
{ {
Tint
9
Convergence { {
+ + Move {Next+} } Back
TV/ VIDEO ENTER MENU
Picture
EZ Video { {
CH.
{ {
DRP
{ {
Cinema
VM { {
ACC { {
{ {
Contrast
{ {
Brightness
Color { {
{ {
Sharpness
{ {
Tint
To start
Convergence { Convergence { {
+ + Move {Next+} } Back
{
{